Sonic HPLC Reservoir Sensor System is used in laboratories to measure the levels of solvents used in unattended liquid chromatographic separations in real time. It is especially useful during a weekend or lengthy chromatographic analysis when there is the risk of running out of solvents during unattended operation. Similar products also monitor liquid levels inside the reservoir but most of those are controlled by weight or light measurement which can give inaccurate measurements when solvent levels change.
The Sonic Sensor System employs a sound wave transmitter positioned in the reservoir’s cap to accurately measure the level of the solvent in the 1 liter reservoir or the waste container. Sonic signals are converted into an electrical signal that can be shown as a visible indication of liquid level on a display. This sensor system provides safe unattended operation by automatically sending a signal to stop the pump when LC solvents get low or to switch a valve so that the extended analysis continues without interruption. It safeguards the loss of valuable samples and analysis time while preventing the waste container from overflowing and creating a hazardous spill in the lab.
The Sonic Sensor is applicable for most solvents used for LC separations and comes in 1, 2 and 3 channel versions that can accommodate up to two HPLC solvents and one waste container that is supplied with the system .
- Useful to check liquid levels in both solvent bottles and waste tanks
- Liquid level displays
- Alarm sounds when volume falls to about 10%
- Remote control thru RS-232C interface (option)
- Simple, one-touch connections
|Sonic Reservoir Sensor
|Reflected Sound Waves
|Solvent: Specialty Bottle 10-1000 mL
Waste: specialty waste probe detects liquid level at a
distance of 75 mm PTFE, SS (waste probe)
|Output signal: Error
|115(H) x 85(W) x 80(D)mm
|DC +24V AC adapter comes as standard accessory, connects to 100-240 V, 0.62 A outlet