Shopping Cart:
Shopping cart is empty.

 

1000 ml Reservoir Bottle and Cap

1000 ml Reservoir Bottle and Cap

1000 ml HPLC Solvent Reservoir Bottle and GL-45 cap with Teflon insert for 1/8" PTFE tubing. Case of 6. Also available as individual bottle and cap @ $50.00ea. All components manufactured in Japan

  • Price: $300.00
  • Qty:

1-16th OD PTFE Tubing

1-16th OD PTFE Tubing
1/16" OD PTFE Tubing available in 10m lengths
  • Price: $20.00
  • Qty:

1-8th OD PTFE Tubing

1-8th OD PTFE Tubing
1/8" OD PTFE Tubing available in 10m lengths
  • Price: $60.00
  • Qty:

2000 ml Reservoir Bottle and Cap

2000 ml Reservoir Bottle and Cap

2000 ml HPLC Solvent Reservoir and GL-45 Cap with Teflon insert for 1/8" OD tubing. Case of 6. Also available as individual reservoir and cap @$80.00 ea. All components manufactured in Japan.

  • Price: $400.00
  • Qty:

500 ml Reservoir Bottle and Cap

500 ml Reservoir Bottle and Cap
500ml HPLC Solvent Reservoir Bottle and Cap with Teflon insert for 1/16" OD tubing.Typically used for the HPLC autosampler wash bottle or for smaller volumes of solvent. Case of 6. Also available as individual bottle and cap @$35.00ea
  • Price: $210.00
  • Qty:

5000 ml Reservoir Bottle and Cap

5000 ml Reservoir Bottle and Cap
5000 ml HPLC Solvent Reservoir and Cap with Teflon insert for 1/8" OD tubing. Case of 6. Also available as individual bottle and cap @$120.00ea
  • Price: $720.00
  • Qty:

Plain Cap

Plain Cap
GL 45 Plain Cap for HPLC Solvent Reservoirs. Pack of 6.
  • Price: $36.00
  • Qty:

Solvent Frit for 1-16th inch tubing

Solvent Frit for 1-16th inch tubing
For 1/16" tubing, 40um pore size, 316 stainless steel. Pack of 2.Simply thread the tubing into the solvent frit opening for a secure fit.
  • Price: $32.00
  • Qty:

Solvent Frit for 1-8th inch tubing

Solvent Frit for 1-8th inch tubing
For 1/8th inch tubing, 10 um pore size, 316 stainless steel. Pack of 2.Simply thread the tubing into the solvent frit opening for a secure fit. Made in Japan.
  • Price: $32.00
  • Qty:

Solvent Reservoir Cap with Teflon Insert

Solvent Reservoir Cap with Teflon Insert
HPLC Solvent Reservoir Cap with Teflon insert for HPLC Solvent Reservoir Bottle. Specify 1/8" or 1/16" OD tubing.Fits our 0.5, 1, 2 and 5L reservoirs (GL 45). Pack of 6, made in Japan.
  • Price: $48.00
  • Qty:

Sonic HPLC Reservoir System

Sonic HPLC Reservoir System
Similar products also monitor liquid levels inside the reservoir but most of those are controlled by weight or light measurement which can give inaccurate measurements when solvent levels change. The Sonic Sensor System employs a sound wave transmitter positioned in the reservoir’s cap to accurately measure the level of the solvent in the 1 liter reservoir or the waste container. Sonic signals are converted into an electrical signal that can be shown as a visible indication of liquid level on a display. This sensor system provides safe unattended operation by automatically sending a signal to stop the pump when LC solvents get low or to switch a valve so that the extended analysis continues without interruption. It safeguards the loss of valuable samples and analysis time while preventing the waste container from overflowing and creating a hazardous spill in the lab.
The basic system consists of one probe for one solvent bottle and one probe for the waste container. To add additional solvent bottles, waste containers or additional probes, please call us at (716) 774-8706 or fill out the contact form. 
  • Price: $1,395.00
  • Qty: